Glock Rear Sight Installation And Removal Pusher Tool For Most Models What's included: 1 - 1/4" x 4.5" zinc plated hex bolt4 - 1/4" hex nuts.Thread locker
Loctite)Use thread locker on the two outside nuts to capture the bolt.The cavities for the hex nuts are designed to 11.3 mm from face to face and the hole for the bolt is 6.5 mm if you want to try metric bolts and nuts.This is compatible with the standard 9mm and .40 slides and the smaller slides like the G43. They're all 21.6mm tall. I'm not sure if the 10mm and .45 slides are any taller though so I can't guarantee they'll fit.Always follow all firearm safety procedures when handling or performing any work on firearmsWe cannot be held liable for any damage or injury caused by using the tool you will receive Returns
Shipping
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Disclaimer Fused Filament Fabrication (FFF), is an additive manufacturing process that belongs to the material extrusion family. In FDM, an object is built by selectively depositing melted material in a pre-determined path layer-by-layer. The materials used are thermoplastic polymers and come in a filament form. The best way to understand this process is think of how a hot glue gun works, it outputs melted plastic, 3D printers do the same thing except on a mm level. Moreover, since the molten material is pressed against the previous layer, its shape is deformed to an oval. This means that FDM parts will always have a wavy surface, even for low layer hieght, and that small features, such as small holes or threads may need to be post processed after printing. FDM parts can be finished to a very high standard using various post-processing methods, such as sanding and polishing, priming and painting, cold welding, vapor smoothing, epoxy coating and metal plating. What's included: 1 - 1/4" x 4.5" zinc plated hex bolt 4 - 1/4" hex nuts. Thread locker (Loctite) Use thread locker on the two outside nuts to capture the bolt. The cavities for the hex nuts are designed to 11.3 mm from face to face and the hole for the bolt is 6.5 mm if you want to try metric bolts and nuts. This is compatible with the standard 9mm and .40 slides and the smaller slides like the G43. They're all 21.6mm tall. I'm not sure if the 10mm and .45 slides are any taller though so I can't guarantee they'll fit. Always follow all firearm safety procedures when handling or performing any work on firearms We cannot be held liable for any damage or injury caused by using the tool you will receiveGlock Rear Sight Installation And Removal Pusher Tool For Most Models What's included: 1 - 1/4" x 4.5" zinc plated hex bolt4 - 1/4" hex nuts. Thread locker (Loctite)Use thread locker on the two outside nuts to capture the bolt.The cavities for the hex nuts are designed to 11.3 mm from face to face and the hole for the bolt is 6.5 mm if you want to try metric bolts and nuts. This is compatible with the standard 9mm and .40 slides and the smaller slides like the G43. They're all 21.6mm tall. I'm not sure if the 10mm and .45 slides are any taller though so I can't guarantee they'll fit.Always follow all firearm safety procedures when handling or performing any work on firearmsWe cannot be held liable for any damage or injury caused by using the tool you will receive
Shipping Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Disclaimer Fused Filament Fabrication (FFF), is an additive manufacturing process that belongs to the material extrusion family. In FDM, an object is built by selectively depositing melted material in a pre-determined path layer-by-layer. The materials used are thermoplastic polymers and come in a filament form. The best way to understand this process is think of how a hot glue gun works, it outputs melted plastic, 3D printers do the same thing except on a mm level. Moreover, since the molten material is pressed against the previous layer, its shape is deformed to an oval. This means that FDM parts will always have a wavy surface, even for low layer hieght, and that small features, such as small holes or threads may need to be post processed after printing. FDM parts can be finished to a very high standard using various post-processing methods, such as sanding and polishing, priming and painting, cold welding, vapor smoothing, epoxy coating and metal plating.
What's included: 1 - 1/4" x 4.5" zinc plated hex bolt4 - 1/4" hex nuts.Thread locker (Loctite)Use thread locker on the two outside nuts to capture the bolt. The cavities for the hex nuts are designed to 11.3 mm from face to face and the hole for the bolt is 6.5 mm if you want to try metric bolts and nuts.This is compatible with the standard 9mm and .40 slides and the smaller slides like the G43. They're all 21.6mm tall. I'm not sure if the 10mm and .45 slides are any taller though so I can't guarantee they'll fit.Always follow all firearm safety procedures when handling or performing any work on firearmsWe cannot be held liable for any damage or injury caused by using the tool you will receive